Aegis health and safety update – September 2025

Safety notice on excavators: Use of the safety control lever or isolation devices

HSE has published a safety notice aimed at excavator operators, slingers, and anyone working in the vicinity of them.

There is a risk that people can be struck by the excavator or a load if the operator does not use the safety control lever or isolation device correctly.

If there are people in the operational arc of an excavator or similar mobile plant, the safety control lever should be applied, or other methods used, to isolate the machine while it is at rest (ticking over).

Research shows that unintended movements of plants occur, but use of a safety control lever or isolation device can prevent this.

Dutyholders must, so far as reasonably practicable, ensure the safety of people in the working arc of slewing plant and any load, with proper planning, management and monitoring of work activities.

Find full information in our safety notice: Excavators: Use of safety control lever or isolation devices – HSE